PPoossttffiixx SSAASSLL HHoowwttoo ------------------------------------------------------------------------------- WWaarrnniinngg People who go to the trouble of installing Postfix may have the expectation that Postfix is more secure than some other mailers. The Cyrus SASL library contains a lot of code. With this, Postfix becomes as secure as other mail systems that use the Cyrus SASL library. Dovecot provides an alternative that may be worth considering. HHooww PPoossttffiixx uusseess SSAASSLL aauutthheennttiiccaattiioonn SMTP servers need to decide whether an SMTP client is authorized to send mail to remote destinations, or only to destinations that the server itself is responsible for. Usually, SMTP servers accept mail to remote destinations when the client's IP address is in the "same network" as the server's IP address. SMTP clients outside the SMTP server's network need a different way to get "same network" privileges. To address this need, Postfix supports SASL authentication (RFC 4954, formerly RFC 2554). With this a remote SMTP client can authenticate to the Postfix SMTP server, and the Postfix SMTP client can authenticate to a remote SMTP server. Once a client is authenticated, a server can give it "same network" privileges. Postfix does not implement SASL itself, but instead uses existing implementations as building blocks. This means that some SASL-related configuration files will belong to Postfix, while other configuration files belong to the specific SASL implementation that Postfix will use. This document covers both the Postfix and non-Postfix configuration. You can read more about the following topics: * Configuring SASL authentication in the Postfix SMTP server * Configuring SASL authentication in the Postfix SMTP/LMTP client * Building Postfix with SASL support * Using Cyrus SASL version 1.5.x * Credits CCoonnffiigguurriinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP sseerrvveerr As mentioned earlier, SASL is implemented separately from Postfix. For this reason, configuring SASL authentication in the Postfix SMTP server involves two different steps: * Configuring the SASL implementation to offer a list of mechanisms that are suitable for SASL authentication and, depending on the SASL implementation used, configuring authentication backends that verify the remote SMTP client's authentication data against the system password file or some other database. * Configuring the Postfix SMTP server to enable SASL authentication, and to authorize clients to relay mail or to control what envelope sender addresses the client may use. Successful authentication in the Postfix SMTP server requires a functional SASL framework. Configuring SASL should therefore always be the first step, before configuring Postfix. You can read more about the following topics: * Which SASL Implementations are supported? * Configuring Dovecot SASL o Postfix to Dovecot SASL communication * Configuring Cyrus SASL o Cyrus SASL configuration file name o Cyrus SASL configuration file location o Postfix to Cyrus SASL communication * Enabling SASL authentication and authorization in the Postfix SMTP server o Enabling SASL authentication in the Postfix SMTP server o Postfix SMTP Server policy - SASL mechanism properties o Enabling SASL authorization in the Postfix SMTP server o Additional SMTP Server SASL options * Testing SASL authentication in the Postfix SMTP server WWhhiicchh SSAASSLL IImmpplleemmeennttaattiioonnss aarree ssuuppppoorrtteedd?? Currently the Postfix SMTP server supports the Cyrus SASL and Dovecot SASL implementations. NNoottee Current Postfix versions have a plug-in architecture that can support multiple SASL implementations. Before Postfix version 2.3, Postfix had support only for Cyrus SASL. To find out what SASL implementations are compiled into Postfix, use the following commands: % ppoossttccoonnff --aa (SASL support in the SMTP server) % ppoossttccoonnff --AA (SASL support in the SMTP+LMTP client) These commands are available only with Postfix version 2.3 and later. CCoonnffiigguurriinngg DDoovveeccoott SSAASSLL Dovecot is a POP/IMAP server that has its own configuration to authenticate POP/IMAP clients. When the Postfix SMTP server uses Dovecot SASL, it reuses parts of this configuration. Consult the Dovecot documentation for how to configure and operate the Dovecot authentication server. PPoossttffiixx ttoo DDoovveeccoott SSAASSLL ccoommmmuunniiccaattiioonn Communication between the Postfix SMTP server and Dovecot SASL happens over a UNIX-domain socket or over a TCP socket. We will be using a UNIX-domain socket for better privacy. The following fragment for Dovecot version 2 assumes that the Postfix queue is under /var/spool/postfix/. 1 conf.d/10-master.conf: 2 service auth { 3 ... 4 unix_listener /var/spool/postfix/private/auth { 5 mode = 0660 6 # Assuming the default Postfix user and group 7 user = postfix 8 group = postfix 9 } 10 ... 11 } 12 13 conf.d/10-auth.conf 14 auth_mechanisms = plain login Line 4 places the Dovecot SASL socket in /var/spool/postfix/private/auth, lines 5-8 limit read+write permissions to user and group postfix only, and line 14 provides plain and login as mechanisms for the Postfix SMTP server. Proceed with the section "Enabling SASL authentication and authorization in the Postfix SMTP server" to turn on and use SASL in the Postfix SMTP server. CCoonnffiigguurriinngg CCyyrruuss SSAASSLL The Cyrus SASL framework supports a wide variety of applications (POP, IMAP, SMTP, etc.). Different applications may require different configurations. As a consequence each application may have its own configuration file. The first step configuring Cyrus SASL is to determine name and location of a configuration file that describes how the Postfix SMTP server will use the SASL framework. CCyyrruuss SSAASSLL ccoonnffiigguurraattiioonn ffiillee nnaammee The name of the configuration file (default: smtpd.conf) is configurable. It is a concatenation from a value that the Postfix SMTP server sends to the Cyrus SASL library, and the suffix .conf, added by Cyrus SASL. The value sent by Postfix is the name of the server component that will use Cyrus SASL. It defaults to smtpd and is configured with one of the following variables: /etc/postfix/main.cf: # Postfix 2.3 and later smtpd_sasl_path = smtpd # Postfix < 2.3 smtpd_sasl_application_name = smtpd CCyyrruuss SSAASSLL ccoonnffiigguurraattiioonn ffiillee llooccaattiioonn The location where Cyrus SASL searches for the named file depends on the Cyrus SASL version and the OS/distribution used. You can read more about the following topics: * Cyrus SASL version 2.x searches for the configuration file in /usr/lib/ sasl2/. * Cyrus SASL version 2.1.22 and newer additionally search in /etc/sasl2/. * Some Postfix distributions are modified and look for the Cyrus SASL configuration file in /etc/postfix/sasl/, /var/lib/sasl2/ etc. See the distribution-specific documentation to determine the expected location. NNoottee Cyrus SASL searches /usr/lib/sasl2/ first. If it finds the specified configuration file there, it will not examine other locations. PPoossttffiixx ttoo CCyyrruuss SSAASSLL ccoommmmuunniiccaattiioonn As the Postfix SMTP server is linked with the Cyrus SASL library libsasl, communication between Postfix and Cyrus SASL takes place by calling functions in the SASL library. The SASL library may use an external password verification service, or an internal plugin to connect to authentication backends and verify the SMTP client's authentication data against the system password file or other databases. The following table shows typical combinations discussed in this document: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | aauutthheennttiiccaattiioonn bbaacckkeenndd |ppaasssswwoorrdd vveerriiffiiccaattiioonn sseerrvviiccee // pplluuggiinn| |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |/etc/shadow |saslauthd | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |PAM |saslauthd | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |IMAP server |saslauthd | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |sasldb |sasldb | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |MySQL, PostgreSQL, SQLite|sql | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |LDAP |ldapdb | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | NNoottee Read the Cyrus SASL documentation for other backends it can use. ssaassllaauutthhdd -- CCyyrruuss SSAASSLL ppaasssswwoorrdd vveerriiffiiccaattiioonn sseerrvviiccee Communication between the Postfix SMTP server (read: Cyrus SASL's libsasl) and the saslauthd server takes place over a UNIX-domain socket. saslauthd usually establishes the UNIX domain socket in /var/run/saslauthd/ and waits for authentication requests. The Postfix SMTP server must have read+execute permission to this directory or authentication attempts will fail. IImmppoorrttaanntt Some distributions require the user postfix to be member of a special group e.g. sasl, otherwise it will not be able to access the saslauthd socket directory. The following example configures the Cyrus SASL library to contact saslauthd as its password verification service: /etc/sasl2/smtpd.conf: pwcheck_method: saslauthd mech_list: PLAIN LOGIN IImmppoorrttaanntt Do not specify any other mechanisms in mech_list than PLAIN or LOGIN when using saslauthd! It can only handle these two mechanisms, and authentication will fail if clients are allowed to choose other mechanisms. IImmppoorrttaanntt Plaintext mechanisms (PLAIN, LOGIN) send credentials unencrypted. This information should be protected by an additional security layer such as a TLS-encrypted SMTP session (see: TLS_README). Additionally the saslauthd server itself must be configured. It must be told which authentication backend to turn to for password verification. The backend is selected with a saslauthd command-line option and will be shown in the following examples. NNoottee Some distributions use a configuration file to provide saslauthd command line options to set e.g. the authentication backend. Typical locations are /etc/sysconfig/saslauthd or /etc/default/saslauthd. UUssiinngg ssaassllaauutthhdd wwiitthh //eettcc//sshhaaddooww Access to the /etc/shadow system password file requires root privileges. The Postfix SMTP server (and in consequence libsasl linked to the server) runs with the least privilege possible. Direct access to /etc/shadow would not be possible without breaking the Postfix security architecture. The saslauthd socket builds a safe bridge. Postfix, running as limited user postfix, can access the UNIX-domain socket that saslauthd receives commands on; saslauthd, running as privileged user root, has the privileges required to access the shadow file. The saslauthd server verifies passwords against the authentication backend / etc/shadow if started like this: % ssaassllaauutthhdd --aa sshhaaddooww See section "Testing saslauthd authentication" for test instructions. UUssiinngg ssaassllaauutthhdd wwiitthh PPAAMM Cyrus SASL can use the PAM framework to authenticate credentials. saslauthd uses the PAM framework when started like this: % ssaassllaauutthhdd --aa ppaamm NNoottee PAM configuration for the Postfix SMTP server is usually given in /etc/ pam.d/smtp and is beyond the scope of this document. See section "Testing saslauthd authentication" for test instructions. UUssiinngg ssaassllaauutthhdd wwiitthh aann IIMMAAPP sseerrvveerr saslauthd can verify the SMTP client credentials by using them to log into an IMAP server. If the login succeeds, SASL authentication also succeeds. saslauthd contacts an IMAP server when started like this: % ssaassllaauutthhdd --aa rriimmaapp --OO iimmaapp..eexxaammppllee..ccoomm NNoottee The option "-O imap.example.com" specifies the IMAP server saslauthd should contact when it verifies credentials. IImmppoorrttaanntt saslauthd sends IMAP login information unencrypted. Any IMAP session leaving the local host should be protected by an additional security layer such as an SSL tunnel. See section "Testing saslauthd authentication" for test instructions. TTeessttiinngg ssaassllaauutthhdd aauutthheennttiiccaattiioonn Cyrus SASL provides the testsaslauthd utility to test saslauthd authentication. The username and password are given as command line arguments. The example shows the response when authentication is successful: % tteessttssaassllaauutthhdd --uu uusseerrnnaammee --pp ppaasssswwoorrdd 0: OK "Success." NNoottee Sometimes the testsaslauthd program is not distributed with a the Cyrus SASL main package. In that case, it may be distributed with -devel, -dev or -debug packages. Specify an additional "-s smtp" if saslauthd was configured to contact the PAM authentication framework, and specify an additional "-f //ppaatthh//ttoo//ssoocckkeettddiirr//mmuuxx" if saslauthd establishes the UNIX-domain socket in a non-default location. If authentication succeeds, proceed with the section "Enabling SASL authentication and authorization in the Postfix SMTP server". CCyyrruuss SSAASSLL PPlluuggiinnss -- aauuxxiilliiaarryy pprrooppeerrttyy pplluuggiinnss Cyrus SASL uses a plugin infrastructure (called auxprop) to expand libsasl's capabilities. Currently Cyrus SASL sources provide three authentication plugins. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |PPlluuggiinn|DDeessccrriippttiioonn | |_ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |sasldb|Accounts are stored stored in a Cyrus SASL Berkeley DB database| |_ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |sql |Accounts are stored in a SQL database | |_ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |ldapdb|Accounts are stored stored in an LDAP database | |_ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | IImmppoorrttaanntt These three plugins support shared-secret mechanisms i.e. CRAM-MD5, DIGEST- MD5 and NTLM. These mechanisms send credentials encrypted but their verification process requires the password to be available in plaintext. Consequently passwords cannot (!) be stored in encrypted form. TThhee ssaassllddbb pplluuggiinn The sasldb auxprop plugin authenticates SASL clients against credentials that are stored in a Berkeley DB database. The database schema is specific to Cyrus SASL. The database is usually located at /etc/sasldb2. NNoottee The sasldb2 file contains passwords in plaintext, and should have read+write access only to user postfix or a group that postfix is member of. The saslpasswd2 command-line utility creates and maintains the database: % ssaassllppaasssswwdd22 --cc --uu eexxaammppllee..ccoomm uusseerrnnaammee Password: Again (for verification): This command creates an account uusseerrnnaammee@@eexxaammppllee..ccoomm. IImmppoorrttaanntt users must specify uusseerrnnaammee@@eexxaammppllee..ccoomm as login name, not uusseerrnnaammee. Run the following command to reuse the Postfix mydomain parameter value as the login domain: % ssaassllppaasssswwdd22 --cc --uu ``ppoossttccoonnff --hh mmyyddoommaaiinn`` uusseerrnnaammee Password: Again (for verification): NNoottee Run saslpasswd2 without any options for further help on how to use the command. The sasldblistusers2 command lists all existing users in the sasldb database: % ssaassllddbblliissttuusseerrss22 username1@example.com: password1 username2@example.com: password2 Configure libsasl to use sasldb with the following instructions: /etc/sasl2/smtpd.conf: pwcheck_method: auxprop auxprop_plugin: sasldb mech_list: PLAIN LOGIN CRAM-MD5 DIGEST-MD5 NTLM NNoottee In the above example adjust mech_list to the mechanisms that are applicable for your environment. TThhee ssqqll pplluuggiinn The sql auxprop plugin is a generic SQL plugin. It provides access to credentials stored in a MySQL, PostgreSQL or SQLite database. This plugin requires that SASL client passwords are stored as plaintext. TTiipp If you must store encrypted passwords, you cannot use the sql auxprop plugin. Instead, see section "Using saslauthd with PAM", and configure PAM to look up the encrypted passwords with, for example, the pam_mysql module. You will not be able to use any of the methods that require access to plaintext passwords, such as the shared-secret methods CRAM-MD5 and DIGEST- MD5. The following example configures libsasl to use the sql plugin and connects it to a PostgreSQL server: /etc/sasl2/smtpd.conf: pwcheck_method: auxprop auxprop_plugin: sql mech_list: PLAIN LOGIN CRAM-MD5 DIGEST-MD5 NTLM sql_engine: pgsql sql_hostnames: 127.0.0.1, 192.0.2.1 sql_user: username sql_passwd: secret sql_database: dbname sql_select: SELECT password FROM users WHERE user = '%u@%r' NNoottee Set appropriate permissions if smtpd.conf contains a password. The file should be readable by the postfix user. NNoottee In the above example, adjust mech_list to the mechanisms that are applicable for your environment. The sql plugin has the following configuration options: sql_engine Specify mysql to connect to a MySQL server, pgsql for a PostgreSQL server or sqlite for an SQLite database sql_hostnames Specify one or more servers (hostname or hostname:port) separated by commas. NNoottee With MySQL servers, specify localhost to connect over a UNIX-domain socket, and specify 127.0.0.1 to connect over a TCP socket. sql_user The login name to gain access to the database. sql_passwd The password to gain access to the database. sql_database The name of the database to connect to. sql_select The SELECT statement that should retrieve the plaintext password from a database table. IImmppoorrttaanntt Do not enclose the statement in quotes! Use single quotes to escape macros! The sql plugin provides macros to build sql_select statements. They will be replaced with arguments sent from the client. The following macros are available: %u The name of the user whose properties are being selected. %p The name of the property being selected. While this could technically be anything, Cyrus SASL will try userPassword and cmusaslsecretMECHNAME (where MECHNAME is the name of a SASL mechanism). %r The name of the realm to which the user belongs. This could be the KERBEROS realm, the fully-qualified domain name of the computer the SASL application is running on, or the domain after the "@" in a username. TThhee llddaappddbb pplluuggiinn The ldapdb auxprop plugin provides access to credentials stored in an LDAP server. This plugin requires that SASL client passwords are stored as plaintext. TTiipp If you must store encrypted passwords, you cannot use the ldapdb auxprop plugin. Instead, you can use "saslauthd -a ldap" to query the LDAP database directly, with appropriate configuration in saslauthd.conf, as described here. You will not be able to use any of the methods that require access to plaintext passwords, such as the shared-secret methods CRAM-MD5 and DIGEST- MD5. The ldapdb plugin implements proxy authorization. This means that the ldapdb plugin uses its own username and password to authenticate with the LDAP server, before it asks the LDAP server for the remote SMTP client's password. The LDAP server then decides if the ldapdb plugin is authorized to read the remote SMTP client's password. In a nutshell: Configuring ldapdb means authentication and authorization must be configured twice - once in the Postfix SMTP server to authenticate and authorize the remote SMTP client, and once in the LDAP server to authenticate and authorize the ldapdb plugin. This example configures libsasl to use the ldapdb plugin and the plugin to connect to an LDAP server: /etc/sasl2/smtpd.conf: pwcheck_method: auxprop auxprop_plugin: ldapdb mech_list: PLAIN LOGIN NTLM CRAM-MD5 DIGEST-MD5 ldapdb_uri: ldap://localhost ldapdb_id: proxyuser ldapdb_pw: password ldapdb_mech: DIGEST-MD5 IImmppoorrttaanntt Set appropriate permissions if smtpd.conf contains a password. The file should be readable by the postfix user. NNoottee The shared-secret mechanisms (CRAM-MD5, etc.) require that the SASL client passwords are stored as plaintext. The following is a summary of applicable smtpd.conf file entries: auxprop_plugin Specify ldapdb to enable the plugin. ldapdb_uri Specify either ldapi:// for to connect over a UNIX-domain socket, ldap: // for an unencrypted TCP connection or ldaps:// for an encrypted TCP connection. ldapdb_id The login name to authenticate the ldapdb plugin to the LDAP server (proxy authorization). ldapdb_pw The password (in plaintext) to authenticate the ldapdb plugin to the LDAP server (proxy authorization). ldapdb_mech The mechanism to authenticate the ldapdb plugin to the LDAP server. NNoottee Specify a mechanism here that is supported by the LDAP server. ldapdb_rc (optional) The path to a file containing individual configuration options for the ldapdb LDAP client (libldap). This allows to specify a TLS client certificate which in turn can be used to use the SASL EXTERNAL mechanism. NNoottee This mechanism supports authentication over an encrypted transport layer, which is recommended if the plugin must connect to an OpenLDAP server on a remote machine. ldapdb_starttls (optional) The TLS policy for connecting to the LDAP server. Specify either try or demand. If the option is try the plugin will attempt to establish a TLS-encrypted connection with the LDAP server, and will fallback to an unencrypted connection if TLS fails. If the policy is demand and a TLS- encrypted connection cannot be established, the connection fails immediately. When the ldapdb plugin connects to the OpenLDAP server and successfully authenticates, the OpenLDAP server decides if the plugin user is authorized to read SASL account information. The following configuration gives an example of authorization configuration in the OpenLDAP slapd server: /etc/openldap/slapd.conf: authz-regexp uid=(.*),cn=.*,cn=auth ldap:///dc=example,dc=com??sub?cn=$1 authz-policy to Here, the authz-regexp option serves for authentication of the ldapdb user. It maps its login name to a DN in the LDAP directory tree where slapd can look up the SASL account information. The authz-policy options defines the authentication policy. In this case it grants authentication privileges "to" the ldapdb plugin. The last configuration step is to tell the OpenLDAP slapd server where ldapdb may search for usernames matching the one given by the mail client. The example below adds an additional attribute ldapdb user object (here: authzTo because the authz-policy is "to") and configures the scope where the login name "proxyuser" may search: dn: cn=proxyuser,dc=example,dc=com changetype: modify add: authzTo authzTo: dn.regex:uniqueIdentifier=(.*),ou=people,dc=example,dc=com Use the ldapmodify or ldapadd command to add the above attribute. NNoottee Read the chapter "Using SASL" in the OpenLDAP Admin Guide for more detailed instructions to set up SASL authentication in OpenLDAP. EEnnaabblliinngg SSAASSLL aauutthheennttiiccaattiioonn aanndd aauutthhoorriizzaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP sseerrvveerr By default the Postfix SMTP server uses the Cyrus SASL implementation. If the Dovecot SASL implementation should be used, specify an smtpd_sasl_type value of dovecot instead of cyrus: /etc/postfix/main.cf: smtpd_sasl_type = dovecot Additionally specify how Postfix SMTP server can find the Dovecot authentication server. This depends on the settings that you have selected in the section "Postfix to Dovecot SASL communication". * If you configured Dovecot for UNIX-domain socket communication, configure Postfix as follows: /etc/postfix/main.cf: smtpd_sasl_path = private/auth NNoottee This example uses a pathname relative to the Postfix queue directory, so that it will work whether or not the Postfix SMTP server runs chrooted. * If you configured Dovecot for TCP socket communication, configure Postfix as follows. If Dovecot runs on a different machine, replace 127.0.0.1 by that machine's IP address. /etc/postfix/main.cf: smtpd_sasl_path = inet:127.0.0.1:12345 NNoottee If you specify a remote IP address, information will be sent as plaintext over the network. EEnnaabblliinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP sseerrvveerr Regardless of the SASL implementation type, enabling SMTP authentication in the Postfix SMTP server always requires setting the smtpd_sasl_auth_enable option: /etc/postfix/main.cf: smtpd_sasl_auth_enable = yes After a "postfix reload", SMTP clients will see the additional capability AUTH in an SMTP session, followed by a list of authentication mechanisms the server supports: % tteellnneett sseerrvveerr..eexxaammppllee..ccoomm 2255 ... 220 server.example.com ESMTP Postfix EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm 250-server.example.com 250-PIPELINING 250-SIZE 10240000 250-AUTH DIGEST-MD5 PLAIN CRAM-MD5 ... However not all clients recognize the AUTH capability as defined by the SASL authentication RFC. Some historical implementations expect the server to send an "=" as separator between the AUTH verb and the list of mechanisms that follows it. The broken_sasl_auth_clients configuration option lets Postfix repeat the AUTH statement in a form that these broken clients understand: /etc/postfix/main.cf: broken_sasl_auth_clients = yes NNoottee Enable this option for Outlook up to and including version 2003 and Outlook Express up to version 6. This option does not hurt other clients. After "postfix reload", the Postfix SMTP server will propagate the AUTH capability twice - once for compliant and once for broken clients: % tteellnneett sseerrvveerr..eexxaammppllee..ccoomm 2255 ... 220 server.example.com ESMTP Postfix EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm 250-server.example.com 250-PIPELINING 250-SIZE 10240000 250-AUTH DIGEST-MD5 PLAIN CRAM-MD5 250-AUTH=DIGEST-MD5 PLAIN CRAM-MD5 ... PPoossttffiixx SSMMTTPP SSeerrvveerr ppoolliiccyy -- SSAASSLL mmeecchhaanniissmm pprrooppeerrttiieess The Postfix SMTP server supports policies that limit the SASL mechanisms that it makes available to clients, based on the properties of those mechanisms. The next two sections give examples of how these policies are used. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |PPrrooppeerrttyy |DDeessccrriippttiioonn | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |noanonymous |Don't use mechanisms that permit anonymous | | |authentication. | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |noplaintext |Don't use mechanisms that transmit unencrypted username | | |and password information. | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |nodictionary |Don't use mechanisms that are vulnerable to dictionary | | |attacks. | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |forward_secrecy|Require forward secrecy between sessions (breaking one | | |session does not break earlier sessions). | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |mutual_auth |Use only mechanisms that authenticate both the client and| | |the server to each other. | |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | UUnneennccrryypptteedd SSMMTTPP sseessssiioonn The default policy is to allow any mechanism in the Postfix SMTP server except for those based on anonymous authentication: /etc/postfix/main.cf: # Specify a list of properties separated by comma or whitespace smtpd_sasl_security_options = noanonymous IImmppoorrttaanntt Always set at least the noanonymous option. Otherwise, the Postfix SMTP server can give strangers the same authorization as a properly- authenticated client. EEnnccrryypptteedd SSMMTTPP sseessssiioonn ((TTLLSS)) A separate parameter controls Postfix SASL mechanism policy during a TLS- encrypted SMTP session. The default is to copy the settings from the unencrypted session: /etc/postfix/main.cf: smtpd_sasl_tls_security_options = $smtpd_sasl_security_options A more sophisticated policy allows plaintext mechanisms, but only over a TLS- encrypted connection: /etc/postfix/main.cf: smtpd_sasl_security_options = noanonymous, noplaintext smtpd_sasl_tls_security_options = noanonymous To offer SASL authentication only after a TLS-encrypted session has been established specify this: /etc/postfix/main.cf: smtpd_tls_auth_only = yes EEnnaabblliinngg SSAASSLL aauutthhoorriizzaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP sseerrvveerr After the client has authenticated with SASL, the Postfix SMTP server decides what the remote SMTP client will be authorized for. Examples of possible SMTP clients authorizations are: * Send a message to a remote recipient. * Use a specific envelope sender in the MAIL FROM command. These permissions are not enabled by default. MMaaiill rreellaayy aauutthhoorriizzaattiioonn With permit_sasl_authenticated the Postfix SMTP server can allow SASL- authenticated SMTP clients to send mail to remote destinations. Examples: # With Postfix 2.10 and later, the mail relay policy is # preferably specified under smtpd_relay_restrictions. /etc/postfix/main.cf: smtpd_relay_restrictions = permit_mynetworks ppeerrmmiitt__ssaassll__aauutthheennttiiccaatteedd reject_unauth_destination # Older configurations combine relay control and spam control under # smtpd_recipient_restrictions. To use this example with Postfix >= # 2.10 specify "smtpd_relay_restrictions=". /etc/postfix/main.cf: smtpd_recipient_restrictions = permit_mynetworks ppeerrmmiitt__ssaassll__aauutthheennttiiccaatteedd reject_unauth_destination ...other rules... EEnnvveellooppee sseennddeerr aaddddrreessss aauutthhoorriizzaattiioonn By default an SMTP client may specify any envelope sender address in the MAIL FROM command. That is because the Postfix SMTP server only knows the remote SMTP client hostname and IP address, but not the user who controls the remote SMTP client. This changes the moment an SMTP client uses SASL authentication. Now, the Postfix SMTP server knows who the sender is. Given a table of envelope sender addresses and SASL login names, the Postfix SMTP server can decide if the SASL authenticated client is allowed to use a particular envelope sender address: /etc/postfix/main.cf: ssmmttppdd__sseennddeerr__llooggiinn__mmaappss == hhaasshh:://eettcc//ppoossttffiixx//ccoonnttrroolllleedd__eennvveellooppee__sseennddeerrss smtpd_recipient_restrictions = ... rreejjeecctt__sseennddeerr__llooggiinn__mmiissmmaattcchh permit_sasl_authenticated ... The controlled_envelope_senders table specifies the binding between a sender envelope address and the SASL login names that own that address: /etc/postfix/controlled_envelope_senders # envelope sender owners (SASL login names) john@example.com john@example.com helpdesk@example.com john@example.com, mary@example.com postmaster admin@example.com @example.net barney, fred, john@example.com, mary@example.com With this, the reject_sender_login_mismatch restriction above will reject the sender address in the MAIL FROM command if smtpd_sender_login_maps does not specify the SMTP client's login name as an owner of that address. See also reject_authenticated_sender_login_mismatch, reject_known_sender_login_mismatch, and reject_unauthenticated_sender_login_mismatch for additional control over the SASL login name and the envelope sender. AAddddiittiioonnaall SSMMTTPP SSeerrvveerr SSAASSLL ooppttiioonnss Postfix provides a wide range of SASL authentication configuration options. The next section lists a few that are discussed frequently. See postconf(5) for a complete list. PPeerr--aaccccoouunntt aacccceessss ccoonnttrrooll Postfix can implement policies that depend on the SASL login name (Postfix 2.11 and later). Typically this is used to HOLD or REJECT mail from accounts whose credentials have been compromised. /etc/postfix/main.cf: smtpd_recipient_restrictions = permit_mynetworks check_sasl_access hash:/etc/postfix/sasl_access permit_sasl_authenticated ... /etc/postfix/sasl_access: # Use this when smtpd_sasl_local_domain is empty. username HOLD # Use this when smtpd_sasl_local_domain=example.com. username@example.com HOLD DDeeffaauulltt aauutthheennttiiccaattiioonn ddoommaaiinn Postfix can append a domain name (or any other string) to a SASL login name that does not have a domain part, e.g. "john" instead of "john@example.com": /etc/postfix/main.cf: smtpd_sasl_local_domain = example.com This is useful as a default setting and safety net for misconfigured clients, or during a migration to an authentication method/backend that requires an authentication REALM or domain name, before all SMTP clients are configured to send such information. HHiiddiinngg SSAASSLL aauutthheennttiiccaattiioonn ffrroomm cclliieennttss oorr nneettwwoorrkkss Some clients insist on using SASL authentication if it is offered, even when they are not configured to send credentials - and therefore they will always fail and disconnect. Postfix can hide the AUTH capability from these clients/networks: /etc/postfix/main.cf: smtpd_sasl_exceptions_networks = !192.0.2.171/32, 192.0.2.0/24 AAddddiinngg tthhee SSAASSLL llooggiinn nnaammee ttoo mmaaiill hheeaaddeerrss To report SASL login names in Received: message headers (Postfix version 2.3 and later): /etc/postfix/main.cf: smtpd_sasl_authenticated_header = yes NNoottee The SASL login names will be shared with the entire world. TTeessttiinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP SSeerrvveerr To test the server side, connect (for example, with telnet) to the Postfix SMTP server port and you should be able to have a conversation as shown below. Information sent by the client (that is, you) is shown in bboolldd font. % tteellnneett sseerrvveerr..eexxaammppllee..ccoomm 2255 ... 220 server.example.com ESMTP Postfix EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm 250-server.example.com 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-AUTH DIGEST-MD5 PLAIN CRAM-MD5 250 8BITMIME AAUUTTHH PPLLAAIINN AAHHRRllcc33QQAAddGGVVzzddHHBBhhcc33MM== 235 Authentication successful To test this over a connection that is encrypted with TLS, use openssl s_client instead of telnet: % ooppeennssssll ss__cclliieenntt --ccoonnnneecctt sseerrvveerr..eexxaammppllee..ccoomm::2255 --ssttaarrttttllss ssmmttpp ... 220 server.example.com ESMTP Postfix EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm ...see above example for more... Instead of AHRlc3QAdGVzdHBhc3M=, specify the base64-encoded form of \0username\0password (the \0 is a null byte). The example above is for a user named `test' with password `testpass'. CCaauuttiioonn When posting logs of the SASL negotiations to public lists, please keep in mind that username/password information is trivial to recover from the base64-encoded form. You can use one of the following commands to generate base64 encoded authentication information: * Using a recent version of the bbaasshh shell: % eecchhoo --nnee ''\\000000uusseerrnnaammee\\000000ppaasssswwoorrdd'' || ooppeennssssll bbaassee6644 Some other shells support similar syntax. * Using the pprriinnttff command: % pprriinnttff ''\\00%%ss\\00%%ss'' ''uusseerrnnaammee'' ''ppaasssswwoorrdd'' || ooppeennssssll bbaassee6644 % pprriinnttff ''\\00%%ss\\00%%ss'' ''uusseerrnnaammee'' ''ppaasssswwoorrdd'' || mmmmeennccooddee The mmmmeennccooddee command is part of the metamail software. * Using Perl MMIIMMEE::::BBaassee6644 (from http://www.cpan.org/): % ppeerrll --MMMMIIMMEE::::BBaassee6644 --ee \\ ''pprriinntt eennccooddee__bbaassee6644((""\\00uusseerrnnaammee\\00ppaasssswwoorrdd""));;'' If the username or password contain "@", you must specify "\@". * Using the ggeenn--aauutthh script: % ggeenn--aauutthh ppllaaiinn username: uusseerrnnaammee password: The ggeenn--aauutthh Perl script was written by John Jetmore and can be found at http://jetmore.org/john/code/gen-auth. CCoonnffiigguurriinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt The Postfix SMTP and the LMTP client can authenticate with a remote SMTP server via the Cyrus SASL framework. At this time, the Dovecot SASL implementation does not provide client functionality. NNoottee The examples in this section discuss only the SMTP client. Replace smtp_ with lmtp_ to get the corresponding LMTP client configuration. You can read more about the following topics: * Enabling SASL authentication in the Postfix SMTP/LMTP client * Configuring sender-dependent SASL authentication * Postfix SMTP/LMTP client policy - SASL mechanism pprrooppeerrttiieess * Postfix SMTP/LMTP client policy - SASL mechanism nnaammeess EEnnaabblliinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt This section shows a typical scenario where the Postfix SMTP client sends all messages via a mail gateway server that requires SASL authentication. TTrroouubbllee ssoollvviinngg ttiippss:: * If your SASL logins fail with "SASL authentication failure: No worthy mechs found" in the mail logfile, then see the section "Postfix SMTP/ LMTP client policy - SASL mechanism pprrooppeerrttiieess". * For a solution to a more obscure class of SASL authentication failures, see "Postfix SMTP/LMTP client policy - SASL mechanism nnaammeess". To make the example more readable we introduce it in two parts. The first part takes care of the basic configuration, while the second part sets up the username/password information. /etc/postfix/main.cf: smtp_sasl_auth_enable = yes relayhost = [mail.isp.example] # Alternative form: # relayhost = [mail.isp.example]:submission smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd * The smtp_sasl_auth_enable setting enables client-side authentication. We will configure the client's username and password information in the second part of the example. * The relayhost setting forces the Postfix SMTP to send all remote messages to the specified mail server instead of trying to deliver them directly to their destination. * In the relayhost setting, the "[" and "]" prevent the Postfix SMTP client from looking up MX (mail exchanger) records for the enclosed name. * The relayhost destination may also specify a non-default TCP port. For example, the alternative form [mail.isp.example]:submission tells Postfix to connect to TCP network port 587, which is reserved for email client applications. * The Postfix SMTP client is compatible with SMTP servers that use the non- standard "AUTH=mmeetthhoodd....." syntax in response to the EHLO command; this requires no additional Postfix client configuration. * The Postfix SMTP client does not support the obsolete "wrappermode" protocol, which uses TCP port 465 on the SMTP server. See TLS_README for a solution that uses the stunnel command. * With the smtp_sasl_password_maps parameter, we configure the Postfix SMTP client to send username and password information to the mail gateway server. As discussed in the next section, the Postfix SMTP client supports multiple ISP accounts. For this reason the username and password are stored in a table that contains one username/password combination for each mail gateway server. /etc/postfix/sasl_passwd: # destination credentials [mail.isp.example] username:password # Alternative form: # [mail.isp.example]:submission username:password IImmppoorrttaanntt Keep the SASL client password file in /etc/postfix, and make the file read+write only for root to protect the username/password combinations against other users. The Postfix SMTP client will still be able to read the SASL client passwords. It opens the file as user root before it drops privileges, and before entering an optional chroot jail. * Use the postmap command whenever you change the /etc/postfix/sasl_passwd file. * If you specify the "[" and "]" in the relayhost destination, then you must use the same form in the smtp_sasl_password_maps file. * If you specify a non-default TCP Port (such as ":submission" or ":587") in the relayhost destination, then you must use the same form in the smtp_sasl_password_maps file. CCoonnffiigguurriinngg SSeennddeerr--DDeeppeennddeenntt SSAASSLL aauutthheennttiiccaattiioonn Postfix supports different ISP accounts for different sender addresses (version 2.3 and later). This can be useful when one person uses the same machine for work and for personal use, or when people with different ISP accounts share the same Postfix server. To make this possible, Postfix supports per-sender SASL passwords and per- sender relay hosts. In the example below, the Postfix SMTP client will search the SASL password file by sender address before it searches that same file by destination. Likewise, the Postfix trivial-rewrite(8) daemon will search the per-sender relayhost file, and use the default relayhost setting only as a final resort. /etc/postfix/main.cf: smtp_sender_dependent_authentication = yes sender_dependent_relayhost_maps = hash:/etc/postfix/sender_relay smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd relayhost = [mail.isp.example] # Alternative form: # relayhost = [mail.isp.example]:submission /etc/postfix/sasl_passwd: # Per-sender authentication; see also /etc/postfix/sender_relay. user1@example.com username2:password2 user2@example.net username2:password2 # Login information for the default relayhost. [mail.isp.example] username:password # Alternative form: # [mail.isp.example]:submission username:password /etc/postfix/sender_relay: # Per-sender provider; see also /etc/postfix/sasl_passwd. user1@example.com [mail.example.com]:submission user2@example.net [mail.example.net] * If you are creative, then you can try to combine the two tables into one single MySQL database, and configure different Postfix queries to extract the appropriate information. * Specify dbm instead of hash if your system uses dbm files instead of db files. To find out what lookup tables Postfix supports, use the command "postconf -m". * Execute the command "postmap /etc/postfix/sasl_passwd" whenever you change the sasl_passwd table. * Execute the command "postmap /etc/postfix/sender_relay" whenever you change the sender_relay table. PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt ppoolliiccyy -- SSAASSLL mmeecchhaanniissmm pprrooppeerrttiieess Just like the Postfix SMTP server, the SMTP client has a policy that determines which SASL mechanisms are acceptable, based on their properties. The next two sections give examples of how these policies are used. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |PPrrooppeerrttyy |DDeessccrriippttiioonn | |_ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |noanonymous |Don't use mechanisms that permit anonymous authentication. | |_ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |noplaintext |Don't use mechanisms that transmit unencrypted username and| | |password information. | |_ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |nodictionary|Don't use mechanisms that are vulnerable to dictionary | | |attacks. | |_ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | |mutual_auth |Use only mechanisms that authenticate both the client and | | |the server to each other. | |_ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ | UUnneennccrryypptteedd SSMMTTPP sseessssiioonn The default policy is stricter than that of the Postfix SMTP server - plaintext mechanisms are not allowed (nor is any anonymous mechanism): /etc/postfix/main.cf: smtp_sasl_security_options = noplaintext, noanonymous This default policy, which allows no plaintext passwords, leads to authentication failures if the remote server only offers plaintext authentication mechanisms (the SMTP server announces "AUTH PLAIN LOGIN"). In such cases the SMTP client will log the following error message: SASL authentication failure: No worthy mechs found NNoottee This same error message will also be logged when the libplain.so or liblogin.so modules are not installed in the /usr/lib/sasl2 directory. The insecure approach is to lower the security standards and permit plaintext authentication mechanisms: /etc/postfix/main.cf: smtp_sasl_security_options = noanonymous The more secure approach is to protect the plaintext username and password with TLS session encryption. To find out if the remote SMTP server supports TLS, connect to the server and see if it announces STARTTLS support as shown in the example. Information sent by the client (that is, you) is shown in bboolldd font. % tteellnneett sseerrvveerr..eexxaammppllee..ccoomm 2255 ... 220 server.example.com ESMTP Postfix EEHHLLOO cclliieenntt..eexxaammppllee..ccoomm 250-server.example.com 250-PIPELINING 250-SIZE 10240000 250-STARTTLS ... Instead of port 25 (smtp), specify port 587 (submission) where appropriate. EEnnccrryypptteedd SSMMTTPP sseessssiioonn ((TTLLSS)) To turn on TLS in the Postfix SMTP client, see TLS_README for configuration details. The smtp_sasl_tls_security_options parameter controls Postfix SASL mechanism policy during a TLS-encrypted SMTP session. The default is to copy the settings from the unencrypted session: /etc/postfix/main.cf: smtp_sasl_tls_security_options = $smtp_sasl_security_options A more sophisticated policy allows plaintext mechanisms, but only over a TLS- encrypted connection: /etc/postfix/main.cf: smtp_sasl_security_options = noanonymous, noplaintext smtp_sasl_tls_security_options = noanonymous PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt ppoolliiccyy -- SSAASSLL mmeecchhaanniissmm nnaammeess Given the SASL security options of the previous section, the Cyrus SASL library will choose the most secure authentication mechanism that both the SMTP client and server implement. Unfortunately, that authentication mechanism may fail because the client or server is not configured to use that mechanism. To prevent this, the Postfix SMTP client can filter the names of the authentication mechanisms from the remote SMTP server. Used correctly, the filter hides unwanted mechanisms from the Cyrus SASL library, forcing the library to choose from the mechanisms the Postfix SMTP client filter passes through. The following example filters out everything but the mechanisms PLAIN and LOGIN: /etc/postfix/main.cf: smtp_sasl_mechanism_filter = plain, login NNoottee If the remote server does not offer any of the mechanisms on the filter list, authentication will fail. We close this section with an example that passes every mechanism except for GSSAPI and LOGIN: /etc/postfix/main.cf: smtp_sasl_mechanism_filter = !gssapi, !login, static:all BBuuiillddiinngg PPoossttffiixx wwiitthh SSAASSLL ssuuppppoorrtt As mentioned elsewhere, Postfix supports two SASL implementations: Cyrus SASL (SMTP client and server) and Dovecot SASL (SMTP server only). Both implementations can be built into Postfix simultaneously. * Building Dovecot SASL support * Building Cyrus SASL support BBuuiillddiinngg DDoovveeccoott SSAASSLL ssuuppppoorrtt These instructions assume that you build Postfix from source code as described in the INSTALL document. Some modification may be required if you build Postfix from a vendor-specific source package. Support for the Dovecot version 1 SASL protocol is available in Postfix 2.3 and later. At the time of writing, only server-side SASL support is available, so you can't use it to authenticate the Postfix SMTP client to your network provider's server. Dovecot uses its own daemon process for authentication. This keeps the Postfix build process simple, because there is no need to link extra libraries into Postfix. To generate the necessary Makefiles, execute the following in the Postfix top- level directory: % mmaakkee ttiiddyy # if you have left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==''--DDUUSSEE__SSAASSLL__AAUUTTHH \\ --DDDDEEFF__SSEERRVVEERR__SSAASSLL__TTYYPPEE==\\""ddoovveeccoott\\""'' After this, proceed with "make" as described in the INSTALL document. NNoottee * The -DDEF_SERVER_SASL_TYPE=\"dovecot\" is not necessary; it just makes Postfix configuration a little more convenient because you don't have to specify the SASL plug-in type in the Postfix main.cf file (but this may cause surprises when you switch to a later Postfix version that is built with the default SASL type of sasl). * If you also want support for LDAP or TLS (or for Cyrus SASL), you need to merge their CCARGS and AUXLIBS options into the above command line; see the LDAP_README and TLS_README for details. % mmaakkee ttiiddyy # if you have left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==''--DDUUSSEE__SSAASSLL__AAUUTTHH \\ --DDDDEEFF__SSEERRVVEERR__SSAASSLL__TTYYPPEE==\\""ddoovveeccoott\\"" \\ ......CCCCAARRGGSS ooppttiioonnss ffoorr LLDDAAPP oorr TTLLSS eettcc........'' \\ AAUUXXLLIIBBSS==''......AAUUXXLLIIBBSS ooppttiioonnss ffoorr LLDDAAPP oorr TTLLSS eettcc........'' BBuuiillddiinngg CCyyrruuss SSAASSLL ssuuppppoorrtt BBuuiillddiinngg tthhee CCyyrruuss SSAASSLL lliibbrraarryy Postfix works with cyrus-sasl-1.5.x or cyrus-sasl-2.1.x, which are available from ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/. IImmppoorrttaanntt If you install the Cyrus SASL libraries as per the default, you will have to create a symlink /usr/lib/sasl -> /usr/local/lib/sasl for version 1.5.x or /usr/lib/sasl2 -> /usr/local/lib/sasl2 for version 2.1.x. Reportedly, Microsoft Outlook (Express) requires the non-standard LOGIN and/or NTLM authentication mechanism. To enable these authentication mechanisms, build the Cyrus SASL libraries with: % ..//ccoonnffiigguurree ----eennaabbllee--llooggiinn ----eennaabbllee--nnttllmm BBuuiillddiinngg PPoossttffiixx wwiitthh CCyyrruuss SSAASSLL ssuuppppoorrtt These instructions assume that you build Postfix from source code as described in the INSTALL document. Some modification may be required if you build Postfix from a vendor-specific source package. The following assumes that the Cyrus SASL include files are in /usr/local/ include, and that the Cyrus SASL libraries are in /usr/local/lib. On some systems this generates the necessary Makefile definitions: Cyrus SASL version 2.1.x % mmaakkee ttiiddyy # if you have left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==""--DDUUSSEE__SSAASSLL__AAUUTTHH --DDUUSSEE__CCYYRRUUSS__SSAASSLL \\ --II//uussrr//llooccaall//iinncclluuddee//ssaassll"" AAUUXXLLIIBBSS==""--LL//uussrr//llooccaall//lliibb --llssaassll22"" Cyrus SASL version 1.5.x % mmaakkee ttiiddyy # if you have left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==""--DDUUSSEE__SSAASSLL__AAUUTTHH --DDUUSSEE__CCYYRRUUSS__SSAASSLL \\ --II//uussrr//llooccaall//iinncclluuddee"" AAUUXXLLIIBBSS==""--LL//uussrr//llooccaall//lliibb --llssaassll"" On Solaris 2.x you need to specify run-time link information, otherwise the ld.so run-time linker will not find the SASL shared library: Cyrus SASL version 2.1.x % mmaakkee ttiiddyy # remove left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==""--DDUUSSEE__SSAASSLL__AAUUTTHH --DDUUSSEE__CCYYRRUUSS__SSAASSLL \\ --II//uussrr//llooccaall//iinncclluuddee//ssaassll"" AAUUXXLLIIBBSS==""--LL//uussrr//llooccaall//lliibb \\ --RR//uussrr//llooccaall//lliibb --llssaassll22"" Cyrus SASL version 1.5.x % mmaakkee ttiiddyy # if you have left-over files from a previous build % mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==""--DDUUSSEE__SSAASSLL__AAUUTTHH --DDUUSSEE__CCYYRRUUSS__SSAASSLL \\ --II//uussrr//llooccaall//iinncclluuddee"" AAUUXXLLIIBBSS==""--LL//uussrr//llooccaall//lliibb \\ --RR//uussrr//llooccaall//lliibb --llssaassll"" UUssiinngg CCyyrruuss SSAASSLL vveerrssiioonn 11..55..xx Postfix supports Cyrus SASL version 1.x, but you shouldn't use it unless you are forced to. The makers of Cyrus SASL write: This library is being deprecated and applications should transition to using the SASLv2 library (source: Project Cyrus: Downloads). If you still need to set it up, here's a quick rundown: Read the regular section on SMTP server configurations for the Cyrus SASL framework. The differences are: * Cyrus SASL version 1.5.x searches for configuration (smtpd.conf) in /usr/ lib/sasl/ only. You must place the configuration in that directory. Some systems may have modified Cyrus SASL and put the files into e.g. /var/lib/ sasl/. * Use the saslpasswd command instead of saslpasswd2 to create users in sasldb. * Use the sasldblistusers command instead of sasldblistusers2 to find users in sasldb. * In the smtpd.conf file you can't use mech_list to limit the range of mechanisms offered. Instead, remove their libraries from /usr/lib/sasl/ (and remember remove those files again when a system update re-installs new versions). CCrreeddiittss * Postfix SASL support was originally implemented by Till Franke of SuSE Rhein/Main AG. * Wietse trimmed down the code to only the bare necessities. * Support for Cyrus SASL version 2 was contributed by Jason Hoos. * Liviu Daia added smtpd_sasl_application_name, separated reject_sender_login_mismatch into reject_authenticated_sender_login_mismatch and reject_unauthenticated_sender_login_mismatch, and revised the docs. * Wietse made another iteration through the code to add plug-in support for multiple SASL implementations, and for reasons that have been lost, also changed smtpd_sasl_application_name into smtpd_sasl_path. * The Dovecot SMTP server-only plug-in was originally implemented by Timo Sirainen of Procontrol, Finland. * Patrick Ben Koetter revised this document for Postfix 2.4 and made much needed updates. * Patrick Ben Koetter revised this document again for Postfix 2.7 and made much needed updates.