Getting started

CHICKEN is a compiler that translates Scheme source files into C, which in turn can be fed to a C compiler to generate a standalone executable. An interpreter is also available and can be used as a scripting environment or for testing programs before compilation.

This chapter is designed to get you started with CHICKEN programming, describing what it is and what it will do for you, and covering basic use of the system. With almost everything discussed here, there is more to the story, which the remainder of the manual reveals. Here, we only cover enough to get you started. Nonetheless, someone who knows Scheme already should be able to use this chapter as the basis for writing and running small CHICKEN programs.

Scheme

Scheme is a member of the Lisp family of languages, of which Common Lisp and Emacs Lisp are the other two widely-known members. As with Lisp dialects, Scheme features

In contrast to Common Lisp, Scheme is very minimal, and tries to include only those features absolutely necessary in programming. In contrast to Emacs Lisp, Scheme is not anchored into any one program (Emacs), and has a somewhat more modern language design.

Scheme is defined in a document called The Revised^5 Report on the Algorithmic Language Scheme, or R5RS for short. (Yes, it really has been revised five times, so an expanded version of its name would be The Revised Revised Revised Revised Revised Report.) A newer report, R6RS, was released in 2007, but this report has attracted considerable controversy, and not all Scheme implementations will be made compliant with it. CHICKEN essentially complies with R5RS.

Even though Scheme is consciously minimalist, it is recognized that a language must be more than a minimal core in order to be useful. Accordingly, the Scheme community uses a process known as `Scheme Requests For Implementation' (SRFI, pronounced `SUR-fee') to define new language features. A typical Scheme system therefore complies with one of the Scheme reports plus some or all of the accepted SRFIs.

A good starting point for Scheme knowledge is http://www.schemers.org. There you will find the defining reports, FAQs, lists of useful books and other resources, and the SRFIs.

The CHICKEN community is at present developing tutorials for programmers who are new to Scheme but experienced with Python, Ruby, or other languages. These can be found on the CHICKEN wiki.

CHICKEN

CHICKEN is an implementation of Scheme that has many advantages.

CHICKEN Scheme combines an optimising compiler with a reasonably fast interpreter. It supports almost all of R5RS and the important SRFIs. The compiler generates portable C code that supports tail recursion, first-class continuations, and lightweight threads, and the interface to and from C libraries is flexible, efficient, and easy to use. There are hundreds of contributed CHICKEN libraries that make the programmer's task easier. The interpreter allows interactive use, fast prototyping, debugging, and scripting. The active and helpful CHICKEN community fixes bugs and provides support. Extensive documentation is supplied.

CHICKEN was developed by Felix L. Winkelmann over the period from 2000 through 2007. In early 2008, Felix asked the community to take over the responsibility of developing and maintaining the system, though he still takes a strong interest in it, and participates actively.

CHICKEN includes

This package is distributed under the BSD license and as such is free to use and modify.

Scheme cognoscenti will appreciate the method of compilation and the design of the runtime-system, which follow closely Henry Baker's CONS Should Not CONS Its Arguments, Part II: Cheney on the M.T.A. paper and expose a number of interesting properties.

The generated C code is fully tail-recursive.

Some of the features supported by CHICKEN:

CHICKEN has been used in many environments ranging from embedded systems through desktop machines to large-scale server deployments. The number of language extensions, or eggs, is constantly growing.

This chapter provides you with an overview of the entire system, with enough information to get started writing and running small Scheme programs.

CHICKEN repositories, websites, and community

The master CHICKEN website is http://www.call-cc.org. Here you can find basic information about CHICKEN, downloads, and pointers to other key resources.

The CHICKEN wiki (http://wiki.call-cc.org) contains the most current version of the User's manual, along with various tutorials and other useful documents. The list of eggs is at http://wiki.call-cc.org/egg-index.

A very useful search facility for questions about CHICKEN is found at http://api.call-cc.org. The CHICKEN issue tracker is at http://bugs.call-cc.org.

The CHICKEN community has two major mailing lists. If you are a CHICKEN user, chicken-users (http://lists.nongnu.org/mailman/listinfo/chicken-users) will be of interest. The crew working on the CHICKEN system itself uses the very low-volume chicken-hackers list (http://lists.nongnu.org/mailman/listinfo/chicken-hackers) for communication. For other topic-specific mailing lists (e.g., announcements, security) and discussion groups, see http://wiki.call-cc.org/discussion-groups.

Installing CHICKEN

CHICKEN is available as C sources. Refer to the README file in the distribution for instructions on installing it on your system.

Because it compiles to C, CHICKEN requires that a C compiler be installed on your system. (If you're not writing embedded C code, you can pretty much ignore the C compiler once you have installed it.)

Refer to the README file for the version you're installing for more information on the installation process.

Alternatively, third party packages in binary format are available. See http://wiki.call-cc.org/platforms for information about how to obtain them.

Development environments

The simplest development environment is a text editor and terminal window (Windows: Command Prompt, OSX: Terminal, Linux/Unix: xterm) for using the interpreter and/or calling the compiler. If you install one of the line editing extensions (e.g., readline, parley, linenoise, you have some useful command line editing features in the interpreter (e.g., Emacs or vi-compatible line editing, customization).

You will need a text editor that knows Scheme; it's just too painful with editors that don't do parenthesis matching and proper indentation. Some editors allow you to execute Scheme code directly in the editor. This makes programming very interactive: you can type in a function and then try it right away. This feature is very highly recommended.

As programmers have very specific tastes about editors, the editors listed here are shown in alphabetic order. We aren't about to tell you which editor to use, and there may be editors not shown here that might satisfy your needs. We would be very interested in reports of other editors that have been used with CHICKEN, especially those that support interactive evaluation of forms during editing. Pointers to these (and to any editor customization files appropriate) should be put on the CHICKEN wiki, and will likely be added to future editions of this manual. (We have had a request for editors that support proportional fonts, in particular.)

In the rest of this chapter, we'll assume that you are using an editor of your choice and a regular terminal window for executing your CHICKEN code.

The Read-Eval-Print loop

To invoke the CHICKEN interpreter, you use the csi command.

$ csi

CHICKEN
(c) 2008-2015, The CHICKEN Team
(c) 2000-2007, Felix L. Winkelmann
Version 4.9.0.1 (stability/4.9.0) (rev 8b3189b)
linux-unix-gnu-x86-64 [ 64bit manyargs dload ptables ]
bootstrapped 2014-06-07

#;1>

This brings up a brief banner, and then the prompt. You can use this pretty much like any other Scheme system, e.g.,

#;1> (define (twice f) (lambda (x) (f (f x))))
#;2> ((twice (lambda (n) (* n 10))) 3)
300

Suppose we have already created a file fact.scm containing a function definition.

(define (fact n)
  (if (= n 0)
      1
      (* n (fact (- n 1)))))

We can now load this file and try out the function.

#;3> (load "fact.scm")
; loading fact.scm ...
#;4> (fact 3)
6

The read-eval-print loop (REPL) is the component of the Scheme system that reads a Scheme expression, evaluates it, and prints out the result. The REPL's prompt can be customized (see the Using the interpreter) but the default prompt, showing the number of the form, is quite convenient.

The REPL also supports debugging commands: input lines beginning with a , (comma) are treated as special commands. (See the full list.)

Scripts

You can use the interpreter to run a Scheme program from the command line. For the following example we create a program that does a quick search-and-replace on an input file; the arguments are a regular expression and a replacement string. First create a file to hold the "data" called quickrep.dat with your favorite editor holding these lines:

xyzabcghi
abxawxcgh
foonly

Next create the scheme code in a file called quickrep.scm with the following little program:

(use irregex) ; irregex, the regular expression library, is one of the
     	      ; libraries included with CHICKEN.

(define (process-line line re rplc) 
  (irregex-replace/all re line rplc))

(define (quickrep re rplc) 
  (let ((line (read-line)))
    (if (not (eof-object? line))
        (begin 
          (display (process-line line re rplc))
          (newline)
          (quickrep re rplc)))))

;;; Does a lousy job of error checking!
(define (main args)
  (quickrep (irregex (car args)) (cadr args)))

To run it enter this in your shell:

$ csi -ss quickrep.scm <quickrep.dat 'a.*c' A
xyzAghi
Agh
foonly

The -ss option sets several options that work smoothly together to execute a script. You can make the command directly executable from the shell by inserting a shebang line at the beginning of the program.

The -ss option arranges to call a procedure named main, with the command line arguments, packed in a list, as its arguments. (There are a number of ways this program could be made more idiomatic CHICKEN Scheme, see the rest of the manual for details.)

The compiler

There are several reasons you might want to compile your code.

The CHICKEN compiler is provided as the command chicken, but in almost all cases, you will want to use the csc command instead. csc is a convenient driver that automates compiling Scheme programs into C, compiling C code into object code, and linking the results into an executable file. (Note: in a Windows environment with Visual Studio, you may find that csc refers to Microsoft's C# compiler. There are a number of ways of sorting this out, of which the simplest is to rename one of the two tools, and/or to organize your PATH according to the task at hand.)

Compiled code can be intermixed with interpreted code on systems that support dynamic loading, which includes modern versions of *BSD, Linux, Mac OS X, Solaris, and Windows.

We can compile our factorial function, producing a file named fact.so (shared object in Linux-ese, the same file type is used in OS X and Windows, rather than dylib or dll, respectively).

chicken$ csc -dynamic fact.scm
chicken$ csi -quiet
#;1> (load "fact.so")
; loading fact.so ...
#;2> (fact 6)
720

On any system, we can just compile a program directly into an executable. Here's a program that tells you whether its argument is a palindrome.

(define (palindrome? x)
  (define (check left right)
    (if (>= left right)
        #t
        (and (char=? (string-ref x left) (string-ref x right))
             (check (add1 left) (sub1 right)))))
  (check 0 (sub1 (string-length x))))
(let ((arg (car (command-line-arguments))))
  (display 
   (string-append arg 
                  (if (palindrome? arg) 
                      " is a palindrome\n"
                      " isn't a palindrome\n"))))

We can compile this program using csc, creating an executable named palindrome.

$ csc -o palindrome palindrome.scm
$ ./palindrome level
level is a palindrome
$ ./palindrome liver
liver isn't a palindrome

CHICKEN supports separate compilation, using some extensions to Scheme. Let's divide our palindrome program into a library module (pal-proc.scm) and a client module (pal-user.scm).

Here's the external library. We declare that pal-proc is a unit, which is the basis of separately-compiled modules in CHICKEN. (Units deal with separate compilation, but don't necessarily involve separated namespaces; namespaces can be implemented by modules.)

;;; Library pal-proc.scm
(declare (unit pal-proc))
(define (palindrome? x)
  (define (check left right)
    (if (>= left right)
        #t
        (and (char=? (string-ref x left) (string-ref x right))
             (check (add1 left) (sub1 right)))))
  (check 0 (sub1 (string-length x))))

Next we have some client code that uses this separately-compiled module.

;;; Client pal-user.scm
(declare (uses pal-proc))
(let ((arg (car (command-line-arguments))))
  (display 
   (string-append arg 
                  (if (palindrome? arg) 
                      " is a palindrome\n"
                      " isn't a palindrome\n"))))

Now we can compile and link everything together. (We show the compile and link operations separately, but they can of course be combined into one command.)

$ csc -c pal-proc.scm
$ csc -c pal-user.scm
$ csc -o pal-separate pal-proc.o pal-user.o
$ ./pal-separate level
level is a palindrome

Installing an egg

Installing eggs is quite straightforward on systems that support dynamic loading (again, that would include *BSD, Linux, Mac OS X, Solaris, and Windows). The command chicken-install will fetch an egg from the master CHICKEN repository, and install it on your local system.

In this example, we install the uri-common egg, for parsing Uniform Resource Identifiers. The installation produces a lot of output, which we have edited for space.

$ chicken-install uri-common

retrieving ...
resolving alias `kitten-technologies' to: http://chicken.kitten-technologies.co.uk/henrietta.cgi
connecting to host "chicken.kitten-technologies.co.uk", port 80 ...
requesting "/henrietta.cgi?name=uri-common&mode=default" ...
reading response ...
[...]
/usr/bin/csc -feature compiling-extension -setup-mode    -s -O2 uri-common.scm -j uri-common
/usr/bin/csc -feature compiling-extension -setup-mode    -s -O2 uri-common.import.scm
cp -r uri-common.so /usr/lib/chicken/5/uri-common.so
chmod a+r /usr/lib/chicken/5/uri-common.so
cp -r uri-common.import.so /usr/lib/chicken/5/uri-common.import.so
chmod a+r /usr/lib/chicken/5/uri-common.import.so
chmod a+r /usr/lib/chicken/5/uri-common.setup-info

chicken-install connects to a mirror of the egg repository and retrieves the egg contents. If the egg has any uninstalled dependencies, it recursively installs them. Then it builds the egg code and installs the resulting extension into the local CHICKEN repository.

Now we can use our new egg.

#;1> (use uri-common)
; loading /usr/lib/chicken/5/uri-common.import.so ...
; [... other loaded files omitted for clarity ...]

#;2> (uri-host (uri-reference "http://www.foobar.org/blah"))
"www.foobar.org"

Accessing C libraries

Because CHICKEN compiles to C, and because a foreign function interface is built into the compiler, interfacing to a C library is quite straightforward. This means that nearly any facility available on the host system is accessible from CHICKEN, with more or less work.

Let's create a simple C library, to demonstrate how this works. Here we have a function that will compute and return the nth Fibonacci number. (This isn't a particularly good use of C here, because we could write this function just as easily in Scheme, but a real example would take far too much space here.)

/* fib.c */
int fib(int n) {
  int prev = 0, curr = 1;
  int next; 
  int i; 
  for (i = 0; i < n; i++) {
    next = prev + curr;
    prev = curr;
    curr = next; 
  }
  return curr;
}

Now we can call this function from CHICKEN.

;;; fib-user.scm
#>
  extern int fib(int n);
<# 
(define xfib (foreign-lambda int "fib" int))
(do ((i 0 (+ i 1))) ((> i 10))
  (printf "~A " (xfib i)))
(newline)

The syntax #>...<# allows you to include literal C (typically external declarations) in your CHICKEN code. We access fib by defining a foreign-lambda for it, in this case saying that the function takes one integer argument (the int after the function name), and that it returns an integer result (the int before.) Now we can invoke xfib as though it were an ordinary Scheme function.

$ gcc -c fib.c
$ csc -o fib-user fib.o fib-user.scm
$ ./fib-user
0 1 1 2 3 5 8 13 21 34 55

Those who are interfacing to substantial C libraries should consider using the bind egg.

Back to The User's Manual

Next: Basic mode of operation